Submersible slurry pump feeding decanter centrifuge

Submersible slurry pump is with structure of vertical single stage and single suction
overhung centrifugal pump , it is made of abrasion-resistant alloy , it can convey medium
with high concentration particles . There is no bearing and gland seal between impeller and
pump body , so it is maintenance-free and high temperature resistance , it is the ideal
equipment to provide impetus for desander ,desilter , especially decanter centrifuge .
The submersible pump is single sucking with cantilever , having the water power parts
connected with bearing , shaft collar and connecting pipe , the liquid discharged out from
rising pipe . And pump impeller is of semi-unshrouded impeller with stirring vane equipped
at the extended location of impeller’ vane . The main characteristics of the submersible
pump are that the pump shaft under water has enough rigidity , with bearing not equipped
between impeller and pump boday . And with bearing encapsulation not adopted , it can convey
medium containing solid particle with bigger concentration . And the length for the
submersible slurry pump to insert under water is between 800mm and 1900mm, with suction pipe
to be equipped if necessary . The drive will be finished by the vertical type motor
installed on the motor pedestal , connecting with the pump through coupling . And looking
from the motor , the pump is rotating clockwise .
Re:http://www.solidcontrolsystem.com/Products/solids-control-equipment/decanter-centrifuge.html